Thread dimensions
Entered = typed by you · Calculated = filled automatically
Current model is the cylinder or bore you have. Nominal size is the M designation.
Your cutter
Required for a cutter-aware PDO. Match the physical tooth, not just its M-size name.
Unknown tooth geometry cannot establish a fit-based PDO.
Calculated CAM setup
| Diameter | Requested | Predicted cut |
|---|
Analytical estimate for Manual / In computer. Confirm the physical tooth profile and qualify fit with a test cut.
Why this value?
The cutter path targets the pitch diameter, including the helical sweep. Major/minor subtraction is a diameter-envelope reference. It cannot independently establish pitch-diameter fit. Diameter comparisons use the displayed precision, not a certified tolerance. Straight, single-start symmetric V threads only; end transitions, tool wear, runout and deflection are not simulated.
Mating thread
Calculated from the thread above.
Pitch-diameter clearance:
Toward Loose adds room between the mating threads. The thread you defined above stays unchanged. This is a calculated allowance, not an ISO fit class or a measured fit.
| Diameter | Defined thread | Mating thread |
|---|
How the mating thread is calculated
Uses a straight, single-start 60° profile and the same cutter. The fit check covers sampled interior flanks and root/crest clearance. It excludes thread ends, machining tolerances, wear and deflection. Confirm the physical cutter and qualify the pair with a test cut.
Thread section
Schematic axial section. Requested references are dashed. Add a cutter to predict the cut. Select a dimension to edit its field.
Optional clearance and pitch checks
Leave unknown measurements blank. Known conflicts prevent copying; unknown checks stay unverified.
Thread you want
60° basic profile unless changed below. Output dimensions are always millimeters.
Names and profile
Other angles require explicit dimensions. Changing the thread size regenerates its basic dimensions.
Male / female profile
Select a diameter row to highlight its line. Schematic, not a fit simulation.
Fusion thread-library parameters
Choose a thread size to generate basic dimensions.
| Parameter | Male / external | Female / internal |
|---|
Review the CAM dimensions
Basic dimensions are a starting point, not a certified 6H/6g fit. XML export and installation are not included.